Reading use this simple guide when buying your bow arrow there are some things you should be aware of before you venture out and buy arrows / bolts for your crossbow. for starters, you should know that if you deviate at all whisker biscuit size chart from what the manufacturer recommends, you are running the risk of sacrificing your accuracy and can damage the bow. you can get different arrows, than those that are included in your package, make sure that they are built to the same specifications. one of the first things you need to know is that you are in need of an arrow that can produce 30 ft.
/pounds kinetic energy to completely penetrate sought after buck. you will need 50 ft./pounds for anything with a thicker hide, like a moose or bear. the industry standard for rating the speed (and hence determining kinetic energy) is using whisker biscuit size chart a 420 grain bolt during the test, so you should always keep that in the back of your mind. if you are on the outside looking in, it seems like common sense to assume that lighter bolts fly faster than their heavier counterparts. this is true, but there are so many other factors that affect your arrow flight, below you will find are broken down in detail.
Whisker biscuit size chart – How Powerful is a Crossbow???
Arrow spine the first concept that you should consider is the crossbow arrow spine. this is essentially the backbone of the arrow. it should give people shooting with the perfect balance of stiffness and flexibility. because an arrow flexes when it was taken from a weapon, you will need to know his spine. how do you plan on using the arrows will greatly push your decision one way or the other. fortunately for us, from time to time is short enough where they do not necessarily require a particular arrow spine.
Because the arrow does not need to flex around a riser, but it glides along the rail, you should whisker biscuit size chart be fine. the factors that you should be more concerned with the diameter (inside and outside). you should also make sure to select the correct total arrow weight (with tip attached) diameter arrow arrow crossbow bolts are normally always have a larger diameter. this is because the larger diameter helps the spine. they also have a much heavier load to bear the weight given to draw in even the most common of crossbows.
If you use arrows aluminum is the most popular at the moment are .013, .016, .019 for the shaft wall thickness. in recent times the carbon arrow has taken over because of consistency. the most popular diameters in this category 21/64 ‘and 22/64’ ‘mass weight when you are looking for arrows you have to make sure that you follow the instructions given from your manufacturer. the unit of measurement for the arrow on the grain. depending on the draw weight of your bow, you will have a certain minimum arrow weight. for the most common crossbows on the market i have not seen recommended grain below 350.
They are usually hover around the industry standard of 420 grains. i have a preference for a heavier arrow, because it helps to cut down on noise and vibration a little as well. it should also be noted that the heavier arrows tend to do slightly better crossbows, while lighter arrows will make them better. arrow shaft length should also be aware that the length of your bolts affect the dynamic spine arrow. think about it this way. when you shoot an arrow from your bow, it is actually compressed. string is pushing up against the arrows and putting force behind it.
If you have an arrow is longer, it will naturally be easier to bend. again, we are lucky because you usually only need 20 ” crossbow arrow or 22 ” crossbow arrow gave the industry standards for crossbows today. fletching specs fletching is a small piece of material that you will typically find at the back of your arrows. many people consider them to be the wings of arrows because they help to guide it along its flight path. fletching helps to steady the arrow by causing the arrow to spin during his flight. you usually hear the term vanes when people refer to their bow fletching arrows.
Almost all of the vanes for crossbow bolts are made from certain types of durable plastic. there is no standard for what kind of arrow vanes whisker biscuit size chart should use, but it is a general rule that the longer your arrows are, the bigger your vanes should be. 2 ”, 2.5 ”, and 3 ” are the most common that you will from time arrow. type nock nock is the part of the arrow on the right behind the vanes, the end of the shaft. its purpose is to keep the arrow in place on the string as you fire.
There are two types of nocks you see when you look at these types of arrows. the first, and most common, is the half moon nock. it will be an end of them look like (you guessed it) a crescent or half moon. etching is used to hold the arrow in place with string. flat nocks are the other kind of notch you see the arrow. foc (front center) concept is important because the front of the center of the arrow is going to affect how it will fly by. it is becoming increasingly important, the more you expect to target. it is also important to note that the use of different types of broadheads affect your arrow flight.
There is a lot of confusing jargon associated with this term, but the one thing you need to know is that if you are a hunter, you will want a higher foc because you will want to get the most energy from your arrow at your intended target. having a larger foc also positively affect your arrow flight. the recommended foc for an arrow with a broadhead tip is usually 10-15% range, with as high as 30% in some even recommending foc’s. we’ll dive a little bit deeper into the foc, in the following article.
Having the right arrow can be the difference between a successful hunt, and a lackluster hunt. make sure you hit the field with the best arrows for your bow.